Red light does not
blink when you press
a key?
The
Cinema 7 does
not operate your
home entertainment
components or is not
performing com-
mands properly?
The
Cinema 7 is
not performing
commands properly?
Problems program-
ming a TV/VCR
combo?
VCR not recording?
CH
▲
/
▼
and PREV
CH not working for
your RCA TV?
Problems changing
channels?
The red light blinks
when you press a
key but you receive
no response from
your home entertain-
ment component?
Replace the batteries with four
(4) new AAA alkaline batteries.
Try all of the codes listed for your
brand of home entertainment
component in the “Setup Codes”
section. Many setup codes may
allow for partial functionality,
however, only one setup code
will operate your home entertain-
ment component correctly. Make
sure that all of the compo-
nents you are setting up can
be operated with an infrared
remote control.
Try all of the codes listed for your
brand of home entertainment
component in the “Set-Up
Codes” section. Many set-up
codes may allow some degree of
operation. However, only one
set-up code will work correctly
with your home entertainment
component.
Try the VCR set-up codes for
your brand. However, some
combo units may require both a
TV code for volume control and
a VCR code for the remaining
functions.
As a safety feature on the
Cinema 7, you must press the
REC key twice.
Due to RCA design (1983-1987),
only the original remote control
will operate these functions.
If your original remote control
required an Enter keystroke
when changing channels, press
the ENTER key on the
Cinema 7
after you enter the channel
number.
Make sure you are aiming your
Cinema 7 at your home enter-
tainment component and that
you are within 15 feet before
using your remote.
Problem
Solution
TROUBLE SHOOTING
Consumer Help Line: 1-330-405-8655
E-mail Address: [email protected]
World Wide Web:
http://www.oneforall.com
LIMITED WARRANTY
Universal Electronics Inc. (“UEI”) warrants, to the
original purchaser only, that this product will be free from
defects in materials and workmanship, under normal use, for
ninety (90) days from the date of original purchase.
This warranty does not cover damage or failures caused
by products or services not supplied by UEI, or which result
from accident, misuse, abuse, neglect, mishandling, misappli-
cation, faulty installation, set-up adjustment, improper main-
tenance, alteration, maladjustment of consumer controls, modi-
fications, commercial use, or that is attributable to acts of God.
There are no express warranties except as listed above.
UEI SHALL NOT BE LIABLE FOR INCIDENTAL OR CON-
SEQUENTIAL DAMAGES RESULTING FROM THE USE
OF THIS PRODUCT OR ARISING OUT OF ANY BREACH
OF WARRANTY. ALL EXPRESS AND IMPLIED WARRAN-
TIES, INCLUDING THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE WARRANTY PERIOD SET FORTH
ABOVE. Some states do not allow the exclusion or limitation
of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above exclusions or limi-
tations may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary
from state to state.
To obtain warranty service for a defective product dur-
ing the warranty period, please return the product, preferably
in the original carton, along with your purchase receipt, to the
store of original purchase. A note detailing the complaint would
be helpful. The store, at its option, will replace or repair this
product if found to be defective.
Universal Electronics Inc.
(330)-405-8655
www.oneforall.com
As you add new components to your home entertain-
ment system, One For All® has a remote control that will fit
your needs. Look for these exciting products at a retailer near
you.
ONE FOR ALL
®
is the registered trademark of Universal
Electronics Inc. Computime International Ltd. is the
Licensee of the ONE FOR ALL
®
brand for USA and
Canada
One For All is designed for compatibility in North America
excluding Mexico.
URC-6200 Cinema 6+
12/00
