Harmony
TM
Low Bed
17
5.5
Manual Brake release
In the event that the bed loses power and the battery is drained with the
brake engaged, check for available power sources. Make sure the power
cord is securely inserted in an outlet. If power is not available, you must use
the manual brake release in order to disengage brake.
To manually release the brake, remove the black plastic circular cover
located at the foot/head ends of the bed between the two wheels.
Note the label reading “MECHANICAL BRAKE OvERRIDE SOCKET.”
Slide the 11 mm socket wrench from the storage bracket located behind the head/foot wheel
assembly. Use the wrench to turn the override socket clockwise 1/4 turn. Repeat at the other end of
the bed and the brake will be released. To re-engage the electronic braking system, return the manual
release to its original position by turning it counter clockwise 1/4 turn.
Handset
6.0 HANDSET OPERATION
Motion occurs only while a button is pressed and held. Motion will stop
when the button is released or the applicable bed section reaches the end
of its range of motion. The nurse call function is also found on the handset.
(See 1.13)
PANTONE
Process Cyan C
PANTONE
301 C
PANTONE
Cool Grey 11C
PANTONE
1807 C
PANTONE
414 C
