onCare Harmony Low Bed Скачать руководство пользователя страница 20

Страница: 20 / 22

8.0 CLEANING PROCEDURES

Eye protection must be worn at all times during the cleaning and disinfection process.

CAUTION: Avoid the use of running water and/or pouring disinfectant liquids during the cleaning

process of the bed frame sections.

8.1

recommended Clinical disinfection liquids

a) Quaternary Ammonium Disinfectant

b) Activated Hydrogen Peroxide

c) Sodium Hypochlorite (bleach) 1:10 ratio with water

NOTE: Specific disinfectants may be required by individual clinical facilities.

CAUTION: Make sure to follow manufacturers’ instructions when mixing and using

cleaning/disinfecting products for optimal results.

CAUTION: Prior to the commencement of any disinfection process, make sure the power cord

is disconnected.

CAUTION: Wear appropriate protective gloves, safety glasses and other personal protective

equipment at all times during the cleaning/disinfection process.

8.2 disinfecting

Use of a microfiber washcloth is recommended during the cleaning and disinfection process. For the
removal of stubborn stains, use a soft bristle brush.

8.3 rinsing

Avoid the use of running water or pressurized spray. Always rinse with a clean microfiber washcloth.

CAUTION: Allow for sufficient drying time before any reintroduction of the bed frame into a

clinical environment.

Always use caution to avoid the potential of cross contamination.

Содержание Harmony Low Bed























Результаты поиска

Содержание Harmony Low Bed

Отзывы:

Бренды по названию

Популярные бренды

onCare Harmony Low Bed, Руководство пользователя

Результаты поиска

Содержание Harmony Low Bed

Отзывы:

Бренды по названию

Популярные бренды