Harmony
TM
Low Bed
19
7.5
integrated pump Holder
The footboard of the Harmony Low Bed features an integrated pump holder designed to easily attach
most air mattress pumps, sequential compression devices (SCDs), and other equipment designed to be
hung on a bed frame. If a specific pump does not securely attach to the integrated pump holder, an
optional attachment is also available.
7.6
auxiliary power Outlet
The Harmony Low Bed is equipped with a 110v auxiliary power outlet. The outlet receives power through
a dedicated black power cord. If the auxiliary power outlet is not powering a device, check that the
black power cord is plugged into a power supply and that the circuit breaker (located next to the
power outlet) does not need to be reset.
7.7
Optional Trapeze/patient Helper
The optional trapeze/patient helper has a limited safe working load. Refer to trapeze label for specific
weight capacity. The trapeze handle height can be adjusted by shortening the chain length. To shorten
the chain length, grasp the handle and position at the desired height, then hang the appropriate chain
link on the hook located on the patient helper bar.
The trapeze has three positions:
a) Centered
Positions the trapeze above
the patient’s upper torso to
provide assistance during
positioning.
b) Off set
Positions the trapeze and
patient helper bar to the
side of the bed for assistance
during egress.
c) Storage
Positions the patient helper
behind the head board,
allowing clear patient access
to caregivers.
B
細部放大圖 B
比例 1 : 8
B
細部放大圖 B
比例 1 : 8
B
細部放大圖 B
比例 1 : 8
