ON Semiconductor NCP1608BOOSTGEVB, Руководство пользователя

Страница: 13 / 25

NCP1608BOOSTGEVB
http://onsemi.com
13
Design Results
The completed evaluation board schematic is shown in Figure 22.
Figure 22. NCP1608BOOSTGEVB Evaluation Board Schematic
The bill of materials (BOM), layout, and summary of
boost equations are shown in Appendix 1, Appendix 2, and
Appendix 3 respectively. This pre
− converter exhibits
excellent THD (Figure 23 and Figure 24), PF (Figure 25),
and efficiency (Figure 26). All measurements are performed
with the following conditions:
− After the board is operated at full load and minimum line
input voltage for 30 minutes
− At an ambient temperature of 25 ° C, open frame, and
without forced air flow
− The input power, PF, and THD are measured using a
PM3000A power meter
− The output voltage is measured using a HP34401A
multimeter
− The output current is set using a PLZ1003WH electronic
load
− The output current is measured using a HP34401A
multimeter
− The output power is calculated by multiplying the output
voltage and output current