Installation Instructions EC 2-25 Lift
(Subject to technical alterations! - Status 09/2018)
This is a translation. The German original shall prevail.
Page 2 of 50
2
Safety instructions for OMS elevator drives
2.1
Intended use
OMS elevator machines EC 2-25 Lift are designed and intended exclusively for installation and
use in electrically operated traction sheave elevators for the conveyance of persons or goods in
accordance with EN 81-1.
Use for any other purpose that the intended use as specified above is considered improper use.
OMS ANTRIEBSTECHNIK disclaims all liability for any damage or injury resulting from such im-
proper use or from errors of procedure or method.
All planning, installation and maintenance work must without exception be carried out by
qualified specialist personnel.
Qualified personnel is defined as persons who due to their education and training, special
training, instruction and experience as well as their knowledge of all pertinent norms and
standards and general and statutory specifications, requirements and regulations, accident
prevention regulations and operating conditions as authorised by those responsible for the
safety of the system to carry out the necessary work and thereby recognise and avoid potential
hazards. (Qualified personnel as defined in IEC 364).
This OMS elevator drive falls within the scope of application of the 9
th
Directive of the Ma-
chine and Product Safety Law (9. Verordnung zum Geräte- und Produktsicherheitsgesetz) and
the Machinery Directive 2006/42/EC and is a machine part to be subsequently installed for its
intended use in an elevator system and is thus without the CE mark.
Commissioning is prohibited until the installer (see Machine Directive 95/16/EC) has properly
installed the product in the designated elevator system and the CE mark has been affixed to
the elevator system to show that the safety requirements for the product as supplied by the
manufacturer are fulfilled.
All other applicable or pertinent regulations and legal requirements (e.g. on operation, mainte-
nance and inspection) remain in force.
OMS does not accept any responsibility, liability or warranty whatsoever for any damage what-
soever caused by improper, unprofessional or other actions which do not comply with these in-
stallation and maintenance instructions and/or do not comply with the aforementioned norms
and standards and are thus detrimental to the product properties and characteristics.
The motors are designed exclusively for use with frequency converters. Customer supplied fre-
quency converters must be adjusted in accordance with the appropriate instruction sheets to
comply with OMS elevator machine characteristics, properties and requirements. Adjust the
frequency converter parameters to the motor output of the drive.
The drive is designed exclusively for use within an enclosed area (e.g. elevator shaft or machine
room).
Содержание Hypodrive EC 2-25 Lift
Страница 2: ......
