OMS Hypodrive EC 2-25 Lift, Руководство по установке

Страница: 40 / 74

APPENDIX A
Technical data OMS elevator machine EC 2-25 Lift
(Subject to technical alterations! - Status 09/2018)
This is a translation. The German original shall prevail.
Seite 36 von 49
Gear unit :
Input speed, max.: n = 1800 min
-1
*)
Efficiency:
η,
n ≥ 96 %
Typical backlash:
4
to 8 arc. minutes
Sound pressure level (n≤ 1500min
-1
/ 26kW): L
pA
= 65 dB(A)
•
typical, measured on an OMS test rig in a sound measurement room with frequency converter,
load and speed correspond to constant travel speed. These values may vary depending on the
system.
Gear ratio I 18,71 24,01
Output shaft : max. torque T 4400 Nm 5400 Nm
max. axle load 80 kN
Elevator car load up to ca. / at suspen-
sion Q 6000kg/ 4:1 2500kg/ 2:1 1600kg/ 1:1
Elevator car speed up to ca. / at suspen-
sion v 0.6 m/s 1.6 m/s 2 m/s
Motor : (only for operation with frequency converter)
Three phase induction motor 4-pole, IP 54, motor protection: PTC,
Type / Diameter: Type: 200 / B= 305
Motor nominal torque up to: T,nenn = 200 Nm
Brake:
Shoe brake with double circuit double acting expansion so-
lenoid
2 solenoid coils, controlled together or individually
Traction sheave:
Diameter: D = 400, 450, 500, 560, 650 mm *)
Weight, ca.: G = 37, 46, 52, 59, 86 kg *)
Width: C = 132mm
Rope diameter: D, s = 10, 11, 12, 13 mm *)
Number of ropes: n = 4 – 7 *)
*) Other options available upon
request
Dimensions:
Only installation position B1 is possible! (see order data sheet)
*with traction sheave D=650mm, b=130mm
Motor
Typ P
nenn
kW
T
nenn
Nm
n
nenn
min
-
1
f
Hz A
mm G
ca.
kg
200 30 200 1470 50 1155 700*
200 36 200 1765 60 1155 700*
180L 26,3 170 1470 50 1144 700*