About Communication Commands
8
ZFX-C Serial Communication Command Reference
Configuration of Measurement Value Data
The following explains the output format of measurement values.
To output measurement values by serial communication, the following items must be set.
For detailed settings, refer to the User's Manual.
ASCII Format
Up to 32 results are output as a data structure of fixed length of up to 12 characters including the sign.
Output content
Set the output content as an expression.
Set the output content at [Setup] - [Support] - [Calculation] - [Data].
Output destination
Specify [RS-232C/422] or [USB] at [System] - [Output] - [Data output].
Output format
Set the output format at [System] - [Output] - [Serial output].
Sign
The sign of the measurement value is stored. Plus: 0/Minus: -
Number of digits of integer section
"0" is inserted in spaces in the integer section and digits past the decimal
point.
When a value is greater than the preset number of digits, all digits other
than the sign digit become "9".
Output range: -9999999.999 to 09999999.999
Number of digits past the decimal point
Decimal separator
Field separator
Record separator
Note
Field separator
Number of digits past the decimal point: max. 3
Decimal separator: 1 digit
Sign + number of digits of integer section: max. 8 digits
(Insert "0" for spaces.)
Record
separator
Measurement value of data 0
Measurement value of data 1
Measurement value of data 31
2 3 4 5 6 . 7 8 9
CR
0 1
0 4 5 6 7 . 8 0 0
CR
0 0
0 4 5 6 7 . 8 0 0
CR
- 0
123456.789
4567.8
-4567.8
< Measurement value > < Data structure >
Example: Number of digits of integer section: 7, number of digits past the decimal point: 3,
decimal separator: period
Содержание ZFX-C
Страница 63: ...Version Upgrade Information ZFX C Serial Communication Command Reference 61 MEMO ...
Страница 64: ...Version Upgrade Information 62 ZFX C Serial Communication Command Reference MEMO ...
Страница 65: ...Version Upgrade Information ZFX C Serial Communication Command Reference 63 MEMO ...