![background image](http://html.mh-extra.com/html/omron/zfx-c/zfx-c_command-reference-manual_1633352017.webp)
About Communication Commands
ZFX-C Serial Communication Command Reference
15
Executing Measurement < MEASURE command >
Executing a Single Measurement
This command executes a single measurement.
< Command format >
< Response format >
< Explanation of parameters >
Measurement values are output only when an expression is set at [Setup] - [Support] - [Calculation] - [Data], and [RS-
232C/422] or [USB] is specified at [System] - [Output] - [Data output].
Measurement value
The acquired measurement value is returned. The measurement value is output in the
format (ASCII/binary) specified in the output conditions.
Configuration of Measurement Value Data p.8
M
E A
S
CR
M
CR
U R
E
or
O
K
CR
E
R
CR
CR
When processing ends successfully
When processing fails
Measurement value
Important
Содержание ZFX-C
Страница 63: ...Version Upgrade Information ZFX C Serial Communication Command Reference 61 MEMO ...
Страница 64: ...Version Upgrade Information 62 ZFX C Serial Communication Command Reference MEMO ...
Страница 65: ...Version Upgrade Information ZFX C Serial Communication Command Reference 63 MEMO ...