Omron WE70-AP, Руководство по эксплуатации, Страница: 58 / 146

Enter is
described in the
next page.
Chapter 3 Basic Setup
3-12
3
Basic
S
etup
3-4. Configuring Encryption
WEP (RC4)/OCB AES encryption key setup can be configured by directly entering hexadecimal number or
ASCII characters in the WEP key text box or entering any alphanumeric characters or symbols in the Key
generator text box.The key generator automatically generates 4 encryption keys, one of which to be used
can be specified in the Key index.
* For encryption setup of TKIP, AES, and WOC KEY, see P.3-18.
■
To Enter Encryption Key Using ASCII Characters
Suppose following conditions to configure.
◎ Encryption method: WEP RC4, 128 (104) bits
◎
Key index: 1 (Factory Shipment Setting)
◎
Input Mode: ASCII character 13 character, hexadecimal number.
* Some wireless LAN devices may use names authentication mode and key ID, which are same as network authentication and key
index.
<To Configure>
The same setup must be applied to a client (slave) for communication.
(1) Open a setup screen of the access point (see Chapter 2-3. Connection
Check, Opening Setup Screen (P.2-13)) and click Wireless setting menu
> Security settings.
• A Security setting screen is displayed.
(2) Set Encryption method as WEP RC4 128 (104).
* If None (Factory Shipment Setting) is set, data will not be encrypted.
(3) In Input mode field of WEP key, click ASCII character 13 character radio
button.
Select 5.
Select 3.
Click 2.
Click 1.
Check that
configuration is
same as factory
shipment setting.
[Key Index Setup]
(Excluding Windows XP with Service Pack Applied)
A range of Key index (key IDs) is from 1 to 4 for Omron's wireless devices, while that for standard wireless network connection in
Windows XP is from 0 to 3.
Selecting "1" for a wireless unit is same as specifying "0" in Key index (advanced) in Windows XP.
Click 4.
Screen of WE70-AP
Click 6.