Omron WE70-AP, Руководство по эксплуатации

Страница: 43 / 146

2-11
Chapter 2. Installation & Connection
2
Installation
&
C
onnection
(7) Check the box of "Internet Protocol (TCP/IP)" and click <Properties>.
Click 1.
Click 2.
(8) Select [Use the following IP address] radio button.Enter [IP
address](192.168.0.100) and [Subnet mask](255.255.255.0), then click
<OK>.(* Close a screen shown in Step (7))
Click 1.
Input IP address 2.
Click 3.
●
IP Address Assignment
An IP address consists of 2 fields; a network block and a host block.
Take a default IP address "192.168.0.254"(class C) of a wireless unit. "192.168.0." represents a network
block and the remaining "254" represents a host block.Network devices (e.g. PC) with the same "network
block" of IP addresses are identified as those on the same network.
A "host block" identifies each network device on the same network.
The followings must be taken into account for assignment of IP addresses:
• Assign the same "network block" for network devices that should be on the same network
• Do not assign the same "host block" for network devices on the same network
• Do not assign a network address (one that has "0" as its host block, in case of subnet mask of
"255.255.255.0")
• Do not assign a broadcast address (one that has "255" as its host block, in case of subnet mask of
"255.255.255.0")
Click after
setup by Step
(8).
Before changing an IP
address, record the
current value.