Omron V550-A20, Руководство по эксплуатации

Страница: 41 / 76

15
V550-A20 Operation Manual
Section 3-
15
Connecting Your V550-A20 To An External Device
SYSMAC Series C200HS or C200H Alpha with RS-232
Connections
Operation
Switch ON the trigger switch (7) shown above to execute V550-A20 to
read and send data to the data memory area of C200
■ ■
. Use the pro-
gram console (6) to confirm the data. In the event the data were not
read, press “?” after the trigger switch is OFF.
V550-A20 Setup
• Communication Condition (Setup):
Baud Rate: 9600 bps
Word Length: 7 bit
Parity: EVEN
Stop Bit: 2 bit
• Trigger Requirements:
Start Code: S
Stop Code: E
Data Output Mode: Single Output
Scan Trigger Type: Serially
Controlled
Trigger Stage: Standard
C200HS or C200H Alpha Setup
• Communication Condition:
Set OFF the dip switch 5 of C200HS or C200H Alpha and set [1000] on
DM6645 to match the communication condition with BCR (refer to
the Reference Manual for the detailed way to change the condition).
• Setting of Start Code & Stop Code:
Set [1000] on DM6648, and set [0D00] on DM6649.
• On the DM, set the ASCII Code [S] to Start Reading, and [E] to Stop
Reading.
• Connection of Trigger Switch:
Connect the trigger switch to the Input Port [00000] Terminal on the
CPU unit to enable to send [S] or [E] through the RS232C line when
the BCR is ON or OFF, respectively.
• Save the received data from the BCR in order from upper digit,
DM0200 must be the top, to down.
1 CPU unit C200HS-CPU21
2 Built-in RS232 port
3 Bar code reader V550-A20
4 Connecting cable V509-A32A-2M
5 Power supply S82S-0305
(5V 0.6A) (see note)
6 Programming C200HS-PRO27
console
7 Trigger switch
NOTE: Not rated for UL class II operation.
3 5
4
2 1
7
6