Omron V550-A20, Руководство по эксплуатации

Страница: 21 / 76

7
V550-A20 Operation Manual
Section 2-
7
What to Do After Receiving the V550-A20
Mounting Plate (part # V559-A26A)
There is one mounting plate, one mounting clip, one #6-32 nut, and
one #6 internal tooth lockwasher included with this assembly. The
mounting plate is designed to hold the V550-A20 in position so the
scan line is parallel to the mounting surface. The plate is rectangular
with an oval slot near each of the four corners. The slots are designed
for #6 mounting screws.
To mount the V550-A20:
Step 1 Fasten the plate to the mounting surface.
Step 2 The plate has one fixed retaining clip, one #6-32 stud
and one #6 nut that holds the adjustable clip. Place
the V550-A20 in position so the slot in the side of
the housing is engaged by the fixed clip.
Step 3 Move the adjustable clip towards the V550-A20 until it
engages the other slot of the V550-A20 housing.
Step 4 Tighten the nut on the stud to secure the V550-A20.
This ensures a tight mount so the V550-A20 does not have any room
for movement during operation, and it also allows you to remove the
V550-A20 and replace it with the use of only one nut.
2.84
3.42
R .06
4 PL
1.97
.156 x .281 slot
4 PL
PEM FH-632-6
1.47
.99
.25
.32
Mounting The V550-A20 Using The Mounting Plate
Mounting Your
V550-A20