Omron V530-C300E, Руководство по эксплуатации

Страница: 90 / 205

74
SET (Setting) Mode
Section 5-1
1,2,3...
1. Select the color of symbol.
Note By default, the DIP switch settings will take priority.
2. Select whether Right & Left Reverse of QR Codes is necessary.
3. Select the gray edge value (i.e., the ratio of black and white) used
to detect finder patterns. (Setting range: 1 to 127; default setting:
32)
If the ratio of the intensity of black and white is large, set to a large
value, and if the ratio of the intensity of black and white is small,
set it to a small value.
This setting can be made using the teaching function (which au-
tomatically measures the optimum value), so whenever resetting
the reading conditions, always use this function first. page 70
4. Select whether Gray Edge Value Retry is necessary. If it is turned
ON, and reading is not correctly performed, then the reading will
be attempted again with a higher or lower gray edge value. (De-
fault setting: OFF)
5. Select the timeout time for decoding one reading. (Setting range:
200 to 2,000 ms; default setting: 500 ms)
Black
(Default
setting)
White
Black symbol printed on white base.
White symbol printed on black
base.
ON For reading an image after reflection, or through the
back of a transparent material, such as glass.
OFF
(Default set-
ting) For normal reading (from the front of the object)
AUTO The right/left reversal of the code will be determined
automatically. Use this setting if the codes are not ori-
ented consistently. Processing will be faster if ON or
OFF is used.