Omron SYSMAC-XR005, Руководство пользователя

Страница: 53 / 64

51
Restore_E3NW
Sysmac Library User’s Manual for EtherCAT N-Smart Series Library (W549)
Troubleshooting
Error code
Expansion
error code
Status Description Correction
16#0000 16#00000000 Normal End --- ---
16#3C10 16#00000001
VenderID Not
Matched
The VenderID in the backup file
does not match the VenderID of
the restore target node.
Specify a backup file with a
VenderID that matches the
VenderID of the restore target
node.
16#3C10 16#00000002
ProductCode
Not Matched
The ProductCode in the
backup file does not match the
ProductCode of the restore
target node. Specify a backup file with a
ProductCode that matches the
ProductCode of the restore
target node.
16#3C10 16#00000003
Revision Not
Matched
The revision number of the
restore destination is older than
the revision number in the
backup file.
Specify the E3NW Unit with a
revision number that is either
the same as or newer than the
revision number in the backup
file as the restore destination.
16#3C10 16#00000004
Configuration
Not Matched
The Sensor Amplifier Unit con-
figuration in the backup file
does not match the Sensor
Amplifier Unit configuration of
the restore target node. Specify a backup file with a
Sensor Amplifier Unit configu-
ration that matches the Sensor
Amplifier Unit configuration of
the restore target node.
16#3C10 16#00000005
Unsupported
Device The device is not supported by
this function block. Check that the specified device
is an E3NW Unit.
16#0400 16#00000000
Input Value Out
of Range
The value of NodeAdr is out of
range.
Set the value of NodeAdr cor-
rectly.
The directory name specified
with
DirName contains one or
more characters that cannot be
used.
Set DirName correctly.
The directory name specified
with
DirName is too long.
Check the length of the direc-
tory name specified with
Dir-
Name so that it is within the
valid range.
16#1400 16#00000000
SD Memory
Card Access
Failure
An SD Memory Card is either
not inserted or is not inserted
properly.
Insert an SD Memory Card cor-
rectly.
The SD Memory Card is bro-
ken.
Replace the SD Memory Card
with one that operates nor-
mally.
The SD Memory Card slot is
broken.
If this error persists even after
making the above two correc-
tions, replace the CPU Unit or
the Industrial PC.
16#1403 16#00000000
File Does Not
Exist
There is no backup file to
restore in the directory speci-
fied with
DirName .
Specify the directory in which a
backup file exists specified in
this function block.
16#1405 16#00000000
File Already in
Use
An instruction attempted to
read or write a file already
being accessed by another
instruction.
Correct the user program so
that this function block is exe-
cuted only when the
Busy out-
put variable for all other
instructions for the same file is
FALSE.