Omron Sysmac NX-series, Руководство пользователя

Страница: 138 / 306

7-3 List of Settings
The followings are the setting descriptions, setting ranges, and default values of the functions that can
be used in the High-speed Analog Input Units.
Restart the NX Unit if you change any parameter whose update timing comes after a restart of the
Unit. The changed settings are reflected after the Unit restart.
It is not necessary to restart the NX Unit for parameters that are updated immediately. The settings are
updated immediately after the new settings are transferred even if the NX Unit is not restarted.
Precautions for Safe Use
If you transfer parameters for Unit operation settings that are updated when the Unit is restarted
after the settings are changed on the Sysmac Studio, the Unit will be restarted after the transfer
is completed. Always sufficiently check the safety at the connected devices before you transfer
the Unit operation settings.
Setting
name
Description
De-
fault
val-
ue
Setting
range
Unit
Index
number
(hex)
Subin-
dex
number
(hex)
Update
timing
Refer-
ence
Ch1 Enable/
Disable Set to enable or disable the
channel.
FALSE: Disable
TRUE: Enable
If you change these settings,
you need to set I/O alloca-
tions. Refer to
7-2 Setting
I/O Allocations with the Sys-
mac Studio
on page 7 - 14
for information on how to set
I/O allocations.
TRU
E TRUE or
FALSE --- 5002 01 After the
Unit is
restarted 8-2 Se-
lecting
Channel
To Use
on page
8 - 4
Ch2 Enable/
Disable 02
Ch3 Enable/
Disable 03
Ch4 Enable/
Disable 04
Ch1 Range
Setting
Set the analog input range.
*1
0
0 to 6
*1
--- 5003 01 After the
Unit is
restarted 8-3 Input
Range
Selection
on page
8 - 6
Ch2 Range
Setting 02
Ch3 Range
Setting 03
Ch4 Range
Setting 04
7 I/O Data and List of Settings
7 - 20
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)