![background image](http://html.mh-extra.com/html/omron/sysmac-ethercat-nj101-series/sysmac-ethercat-nj101-series_connection-manual_1633431011.webp)
6
.
EtherCAT Settings
8
6. EtherCAT Settings
This section describes the parameter and device variables that are defined in this guide.
In the following sections, the Dry Vacuum Pump is referred to as the "slave unit" in some
descriptions.
6.1. Parameter
The following parameter is required to connect the Dry Vacuum Pump and the Controller via
EtherCAT.
Name
Setting item
Setting
value
Remarks
Dry Vacuum Pump Node address
1
By the ID Selector (hardware switch)
Additional Information
The node address can also be set using Sysmac Studio.
Refer to
2-2 Setting the Node Addresses
of the
EtherCAT Slaves of the NJ/NX-series CPU
Unit Built-in EtherCAT® Port User's Manual
(Cat. No. W505) for information on how to set the
node address using Sysmac Studio.
Содержание sysmac EtherCAT NJ101 Series
Страница 33: ...30 ...
Страница 34: ...2021 0621 0621 P745 E1 01 ...