![background image](http://html.mh-extra.com/html/omron/sysmac-ethercat-nj101-series/sysmac-ethercat-nj101-series_connection-manual_1633431020.webp)
7
.
EtherCAT Connection Procedure
17
7.3.2. Setting the EtherCAT Network Configuration
Set the EtherCAT network configuration.
1
Turn ON Controller and Dry
Vacuum Pump.
2
Select
Communications Setup
from the Controller Menu.
3
The Communications Setup
Dialog Box appears.
Check that
Direct connection via
Ethernet
is selected in the
Connection type
Field.
Click
OK
.
4
Select
Online
from the
Controller Menu.
*If the dialog box on the right
appears, check the message
and click
OK
. Then select
Online
again.
*If the dialog box on the right
appears, check the message
and click
Yes
.
*The message of the dialog box
varies with the Controller
status. Check the message
and click on an appropriate
button to proceed with the
processing.
5
When an online connection is
established, a yellow line
appears under the toolbar.
Содержание sysmac EtherCAT NJ101 Series
Страница 33: ...30 ...
Страница 34: ...2021 0621 0621 P745 E1 01 ...