25
3-4
PLAY Mode
Playing Back Messages in PLAY Mode
Connect an output device
(speaker or amplifier) to the
Voice Unit. (A recorded mes-
sage can also be monitored via
the built-in speaker.)
Set the line/speaker selector
switch to match the connected
output device.
Set the mode selector
switch to PLAY.
Select a message number
with the MSG No. increment/
decrement switch.
Push the ST/SP switch to start
message playback.
Adjust the output level with
the output volume control.
To interrupt playback, push
the ST/SP switch again.
Start
End
Messages can be played back in PLAY mode and ON-LINE mode. In PLAY
mode, messages are played back according to the manual selections the
user makes. In ON-LINE mode messages are played back according to the
program.
This section describes playback in PLAY mode, which is the simpler of the
two modes.
(To playback messages in ON-LINE mode, refer to
3-8 ON-line mode.)
Messages can be checked with the built-in monitor speaker, however to
check the volume and sound quality of the messages connect an external
speaker or amplifier to the message output jack of the Voice Unit. (For de-
tails, refer to 1-3 Interface.)
Set the line/speaker selector switch to match the connected output device.
Set the switch to the L position when an external amplifier is connected. Set it
to the speaker side when a speaker is connected.
When the Voice Unit is ready for playback, the PLAY indicator is blinking at
0.5 second intervals.
Connecting Output Devices
Set the mode selector to
PLAY
PLAY Mode
Section 3-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com