Omron SYSDRIVE 3G3SV, Руководство пользователя

Страница: 41 / 64

/
2-9 Function/Constant List
First Functions (Constant Nos. 0 to 19)
Function No. Name Description Initial
setting
User
set
values
See
page
Password
setting 0 Password 0: Password (No. 00) setting/reading and
first function (constant Nos. 1 to 19)
reading possible
1 43
Constant
write-in
prohibit 1: First function (constant Nos. 0 to 19) set-
ting/reading possible
2: First and second function (constant Nos.
0 to 29) setting/reading possible
Constant
group se-
lection 3: First, second and third function (constant
Nos. 0 to 59) setting/reading possible
Fault con-
tents clear 6: Fault record clear
Constant
initializa-
tion 8: Initialize (multifunction terminal: initial
value setting)
9: Initialize (3-wire sequence)
Operation
method
selection 1 Run signal
selection 1 1st digit = 0: Main frequency reference-ex-
ternal terminals 11 and 13 in-
puts
1: Main frequency reference-op-
erator Fxxxx
2nd digit = 0: Run by external terminal run
command
1: Run by operator run com-
mand
0000 44
Stopping
method
selection 3rd digit = 0: Deceleration to a stop
1: Coasting to a stop
Output
voltage li-
mitter Output volt-
age limitter 4th digit = 0: With output voltage limitter
1: Without output voltage limitter
56
V/f char-
acteristic
setting 2 Maximum
frequency Setting unit: 0.1 Hz, setting range: 50.0 to
400.0 Hz 60.0 Hz 44
3 Maximum
voltage Setting unit: 0.1 V, setting range: 0.1 to
255.0 V 200.0 V 44
4 Maximum
voltage fre-
quency
(base fre-
quency) Setting unit: 0.1 Hz, setting range: 0.1 to
400.0 Hz 60.0 Hz 44
5 Intermediate
output fre-
quency Setting unit: 0.1 Hz, setting range: 0.1 to
400.0 Hz 1.5 Hz 44
6 Intermediate
output fre-
quency volt-
age Setting unit: 0.1 V, setting range: 0.1 to
255.0 V 12.0 V 44
"
Section 2-9