![background image](http://html.mh-extra.com/html/omron/smartcontroller-ex/smartcontroller-ex_user-manual_1633417021.webp)
Chapter 3: Installation
!
CAUTION:
Use suitable measures for eliminating electrostatic discharge dur-
ing removal and installation of the SD card. This includes, but is not limited to,
the use of a grounded wrist strap
!
CAUTION:
Do not remove the SD card when power is connected to the con-
troller.
Removing an SD Card
To remove an SD card from a SmartController EX motion controller:
1. Make sure that the controller is disconnected from its power source.
2. Locate the SD compartment (see the following figure).
1
Figure 3-5. (1) SD Memory Card Compartment
NOTE:
If you are replacing an existing SD, the original must be sent to the fact-
ory for replacement.
3. Press the SD card in, and release. The card will pop out.
Remove the card. Contact your sales representative for instructions on returning it.
Installing an SD Card
To install an SD card into a SmartController EX motion controller:
1. Make sure that the controller is powered off.
2. Locate the SD card compartment (see the preceding figure).
3. Carefully remove the SD card from the READ ME FIRST box or shipping container.
11069-000 Rev. H
SmartController EX User's Guide
21
Содержание SmartController EX
