Omron SENSOR SUPPORT SOFTWARE S3 Скачать руководство пользователя страница 6

Страница: 6 / 66

Validity

Section 1-1

1-1

Validity

These operating instructions apply only in connection with the

operating

instructions of a sensor belonging to the E3NT type series.

Read the sensor's operating instructions completely and conscientiously. All
information that is important to working with sensors in the

E3NT

type series

can be found in the

ABBO 0017

operating instructions.

Pay attention to all safety notes that are contained in the sensor's oper-
ating instructions.

1-2

Use

The

SensorSupportSoftware S

serves to set sensors in the

E3NT

type

series and is only capable of operating in connection with these sensors.

1-3

Copyright

For copyright reasons, these operating instructions must not be modified,
amended or shortened.

By using the

SensorSupportSoftware S

, you acknowledge the following

provisions:

1-3-1

Proprietary right

The software and data are the property of

OMROM

or its suppliers. Sale and

forwarding of the software or its data for commercial purposes are not permit-
ted.
It is not permitted to modify, alter or shorten the software or its data. In partic-
ular, the name

OMRON

must not be removed. It is not allowed to add data

within the software package.

MICROSOFT

, MS

, MS-DOS

, Pentium

and WINDOWS

are registered

trademarks.

1-3-2

Liability

OMRON

does not assume any warranty for the correctness and complete-

ness of software and data; liability for damages resulting from defective soft-
ware and data is rules out.
In all cases,

OMRON's

liability is limited to the amount that the customer has

actually paid for this product.
In particular,

OMRON

does not assume any liability for damages or data loss

on PCs/laptops as the result of the use of the

SensorSupportSoftware S

the connection of the optical data interface.

OMRON

Содержание SENSOR SUPPORT SOFTWARE S3



































































Результаты поиска

Содержание SENSOR SUPPORT SOFTWARE S3

Отзывы:

Omron SENSOR SUPPORT SOFTWARE S3, Руководство по эксплуатации, Страница: 6 / 66

Результаты поиска

Содержание SENSOR SUPPORT SOFTWARE S3

Отзывы: