Omron NT15S, Руководство по эксплуатации

Страница: 112 / 233

98
Standard Mode
Section 4-6
4.6.3.8 Printer Control
StopPrint
When the system variable is activated, the print process currently in progress is
terminated.
Data type: Numeric
Editor: Selection text , positive decimal number, soft key,
function key
Output: ---
Possible values: (0) Initial state
(1) Terminate print process
BlockPrint
Upon activation of this system variable, the block selected in the message mask is
printed.
Data type: Numeric
Editor: Selection text , positive decimal number, soft key,
function key
Output: ---
Possible values: (0) Initial state
(1) Print block
PrintAllRep
Upon activation of this system variable, the entire serial message memory is print-
ed. The output is as predefined.
Data type: Numeric
Editor: Selection text , positive decimal number, soft key,
function key
Output: ---
Possible values: (0) Initial state
(1) Formatted printout
(2) Full-length printout
PrintAllState
Upon activation of this system variable, the entire parallel message memory (sta-
tus messages) is printed.
Data type: Numeric
Editor: Selection text , positive decimal number, soft key,
function key
Output: ---
Possible values: (0) Initial state
(2) Print message buffer