Omron NT15S, Руководство по эксплуатации

Страница: 103 / 233

89
Standard Mode
Section 4-6
ComTimeout
Specifies the monitoring period for SER1. The value (0) deactivates the timeout
monitoring function.
Data type: Numeric
Editor: Positive decimal number
Output: ---
Possible values: (0) Inactive Initial state
(1 to 65535) Timeout monitoring active (time in
ms)
ComRetryTimeout
Specifies the period of time, in milliseconds, that the terminal allows to elapse after
an attempt to establish a connection via SER1 failed, before making another at-
tempt. This allows the time period required for the PLC-specific powerup phase to
be bridged, thereby avoiding the generation of an error message.
Data type: Numeric
Editor: Positive decimal number
Output: ---
Possible values: 0 to 65535 ms
ComSlaveNr
Contains the slave number used for the device on the network. This address
can be used to address the operating terminal on the bus.
Data type: Numeric
Editor: Positive decimal number
Output: Positive decimal number
Possible values: 0 to 255
4.6.3.3 Error Statistics SER1
ComParityCount
Error counter for monitoring of parity errors on SER1 to the PLC. Is erased on every
download.
Data type: Numeric
Editor: (Possible)
Output: Positive decimal number
Possible values: 0 to 65535
ComOverrunCount
Error counter for monitoring of overrun errors on SER1 to the PLC. Is erased on
every download.
Data type: Numeric
Editor: (Possible)
Output: Positive decimal number
Possible values: 0 to 65535