![background image](http://html1.mh-extra.com/html/omron/nq-hmi/nq-hmi_getting-started-manual_744230103.webp)
89
9 Set all data as shown in the screenshot.
10 Click
Connect
on
Connection
menu.
11 Set all data as shown in the screenshot. Click
OK
.
12 Connect the cable to the NQ-Series and PC (For the Modbus slave this means a proper RS-232 or RS-422
connection.) Refer to A-2-3 NQ to PC. Connect the female port of the cable to the PC port and connect the
male port of the cable to COM1 port of the NQ-Series.
13 Enter
123
in the NQ-Series’ screen. If the connection has been correctly established the same value is
shown in ModSim.
Note
The following messages are displayed on the NQ-Series’ screen if problems occur:
Содержание NQ HMI
