Omron NQ HMI, Руководство по началу работы

Страница: 40 / 146

Using NQ-Designer Section 4-2
26
S0003_02 RTC fail Read RTC fail (contents of
registers not within
defined ranges e.g.
minutes>60 )
S0003_14 Comm1 status Read 0: communication error
1: communication OK
S0003_15 Comm2 status Read 0: communication error
1: communication OK
s0003 Minute change pulse Read 1 for every change in
minute for one scan
cycle
s0004 Hour change pulse Read 1 for every change in
hour for one scan cycle
s0005 Date change pulse Read 1 for every change in
date for one scan cycle
s0006 Month change pulse Read 1 for every change in
month for one scan
cycle
s0007 Year change pulse Read 1 for every change in
year for one scan cycle
s0008 Screen saver control Read/Write 0: disable screen saver
1: enable screen saver
This bit can be changed
in during operation
s0009 Beeper on/off Read/Write 0: disable beeper
1: enable beeper
This bit can be changed
during operation.
s0010 Battery status Read 0: battery voltage is OK
1: low battery
(below 2.2 V)
s0012 Update the historical trend Read/Write Update the historical
trend window when set
to 1
s0014 Acknowledge all alarms Read 0: all alarms are
acknowledged
1: all alarms are not
acknowledged in the
real and historical
alarms
s0016 Valid key beeper Read/Write 0: disable valid Function
key beeper
1: enable valid Function
key beeper
This bit can be changed
during operation
Register Tag name Read/Write Description