manualshive.com logo in svg

Omron NJ-series, Руководство по подключению к сети, Страница: 5 / 86

Поделиться
Скачать
Omron NJ-series Скачать руководство пользователя страница 5

2. Terms and Definitions 

  2

 

2. Terms 

and 

Definitions 

 

Term 

Explanation and Definition 

Node 

Controllers and devices are connected to the EtherNet/IP network via the 

EtherNet/IP ports. The EtherNet/IP recognizes each EtherNet/IP port 

connected to the network as one node.   

When a device with two EtherNet/IP ports is connected to the 

EtherNet/IP network, the EtherNet/IP recognizes this device as two 

nodes.  

The EtherNet/IP achieves the communications between controllers or the 

communications between controllers and devices by exchanging data 

between these nodes connected to the network. 

Tag 

A minimum unit of the data that is exchanged on the EtherNet/IP network 

is called a tag. The tag is defined as a network variable or as a physical 

address, and it is allocated to the memory area of each device.   

Tag set 

In the EtherNet/IP network, a data unit that consists of two or more tags 

can be exchanged. The data unit consisting of two or more tags for the 

data exchange is called a tag set. Up to eight tags can be configured per 

tag set for OMRON controllers.   

Tag data link 

In the EtherNet/IP, the tag and tag set can be exchanged cyclically 

between nodes without using the user program. This standard feature on 

the EtherNet/IP is called a tag data link.   

Connection 

A connection is used to exchange data as a unit within which data 

concurrency is maintained. The connection consists of tags or tag sets. 

Creating the concurrent tag data link between the specified nodes is 

called a "connection establishment ". When the connection is 

established, the tags or tag sets that configure the connection are 

exchanged between the specified nodes concurrently. 

Originator and 

Target 

To perform tag data links, one node requests the opening of a 

communications line called a "connection".   

The node that requests opening the connection is called "originator", and 

the node that receives the request is called a "target". 

Tag data link 

parameter 

The tag data link parameter is the setting data to perform the tag data 

link. It includes the data to set tags, tag sets, and connections.   

 

Содержание NJ-series























































































Отзывы:

Нет отзывов