7. EtherNet/IP Connection Procedure
23
7.3.2. Connecting Online and Transferring the Project Data
Connect online with the Sysmac Studio and transfer the project data to the Controller.
Always confirm safety at the destination node before you transfer a user
program, configuration data, setup data, device variables, or values in memory
used for CJ-series Units from the Sysmac Studio.
The devices or machines may perform unexpected operation regardless of the
operating mode of the CPU Unit.
1
Select
Change Device
from the
Controller Menu.
2
The Change Device Dialog Box
is displayed.
Confirm that Device and Version
to use are set as shown on the
right.
*If the settings are different,
select the setting items from the
pull-down list.
Click the
OK
Button.
3
If the settings were changed in
step 2, the Build Dialog Box is
displayed. Check the contents
and click the
Yes
Button.
4
Select
Communications Setup
from the Controller Menu.
Содержание NJ-series
Страница 71: ...10 Appendix 2 Setting the Tag Data Links Using the Software 68 16 Click the OK Button ...
Страница 85: ...82 ...
Страница 86: ...2013 0911 P568 E1 01 ...
