In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. L013-E1-05
OMRON Corporation
Industrial Automation Company
Control Devices Division H.Q.
Analog Controller Division
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7080/Fax: (81)75-344-7189
Printed in Japan
0506-0.3C (0696) (M)
!
WARNING
Do not short the terminals of, disassemble, deform under
pressure, or incinerate the Battery. Doing so may result in
minor injury due to bursting, ignition, or leakage of fluid.
!
CAUTION
Do not touch any of the terminals or the back panel while
power is being supplied. Doing so may result in electric
shock. Be sure to mount the terminal cover after wiring.
Before changing times or other settings while power is
being supplied, either turn OFF the power on the load
side or set the output ON/OFF switch to OFF and confirm
the safety of the system. Unexpected operation may
occasionally result.
Tighten the terminal screws to the specified torque.
Loose screws may occasionally result in fire or
malfunction.
Do not allow metal fragments or lead wire scraps to fall
inside the Product. This may occasionally cause electric
shock, fire, or malfunction.
Never disassemble, repair, or modify the Product. This
may occasionally cause electric shock, fire, or
malfunction.
Do not use the Product where flammable or explosive gas
is present. There may occasionally be a risk of explosion
resulting in minor injury.
