background image

Questions?, ¿Preguntas? 
201.661.9944

 

©2010 AmerTac™

250 Boulder Drive

Breinigsville, PA 18031

www.amertac.com

Made in China

Hecho en China

Fabriqué en Chine

Outdoor

Daily Timer

 with grounded outlet

Instruction Manual & Warranty

TM11DOLB

Limited One Year Warranty

AmerTac™ warrants this product to be free from defects in material and workmanship for a period

 

of one year from the date of purchase. AmerTac’s obligations are limited to repairing or replacing

 

any defective unit and are effective only if such units are returned within one year of the purchase

 

date to AmerTac, 

250 Boulder Drive, Breinigsville, PA 18031

.

 

Warranty void if damage is due to 

misuse or improper installation. In no circumstance will AmerTac™

 

be liable for consequential or 

incidental damages relating in any way to this product.

I09-0053-C

1. Setting On/Off Periods

This timer can set up to 48 On/Off commands a day. Using your finger, a pen or screwdriver,
pull up all the pegs that correspond to the desired “Off” period. For the desired “On” period,
make sure the pegs are pushed down.
Each peg represents 30 minutes; 2 pegs represents 1 hour.

2. Setting Time

Turn dial clockwise until triangular pointer is pointing
at current time. Ensure that switch on the unit is set
to the TIMER ON position.

3. Connection

Once the desired On/Off periods and current time are set,
plug Timer into wall socket, and then appliance’s plug into
Timer. Ensure the wall socket and the appliance is turned on.
The Timer will start to operate and switch the appliance on
and off according to the pre-set On/Off commands.

4. Manual On/Off

The pre-set On/Off commands can be interrupted by using the manual override switch,
located on top of unit. When switched to the OUTLET ON position, connected appliance
is switched on permanently. To reactivate the timer’s control of the appliance, turn the
appliance switch on and set the timer’s override switch to TIMER ON.
In case of power failure, reset the time of day as explained in step 2.

5. Wall Mounting

- If Outdoor Timer is mounted on outside wall or post it must be at least 3 feet

above ground and close enough to be plugged into an electrical outlet receptacle
suitable for wet locations.

- Place keyhole slots over screws and push Outdoor Timer down to lock into place.

Specifications

15 Amps, 1875 Watts resistive
10 Amps, 1250 Watts tungsten
125V~, 60Hz

5

4

3

2

1

12 11 10

9

8

7

5

4

3

2

1

12

11

10

9

8

7

AM

Daytime

Nighttime

PM

Reviews: