![background image](http://html1.mh-extra.com/html/omron/fh-1-series/fh-1-series_user-manual_742686045.webp)
WWW.NNC.IR
Saving Settings before Turning OFF the Power and Restarting
43
1
Be
fo
re
O
p
er
at
ion
Vision System FH/FZ5 Series
User’s Manual (Z340)
Saving Settings before Turning OFF the Power and Restarting
Before you turn OFF the power supply to the Controller, save the data that you have set to the flash memory in
the Controller.
The settings data in the flash memory of the Controller are loaded everytime the Controller is restarted, so make
sure to use the [Data save] command to save the settings data to the flash memory in the Controller. Then,
always restart the Controller. The settings data will not take effect unless you restart the Controller. If you do not
save the data to the flash memory in the Controller, changes to the settings will be lost when you turn OFF the
power supply.
1
In the Main Window (layout 0), click the
[Data save] button in the Toolbox Pane
to save the settings data.
2
Turn OFF the power supply to the Controller and exit the system.
Restarting the Controller: [System Restart]
You can restart the Controller. Before restarting, back up any required data, such as scene data and system
data.
Reference: Saving Settings Data to the Flash Memory and Restarting (p.257)
1
Select [System restart] from the [Function] menu.
The [System restart] dialog box is displayed.
2
Click [OK].
The Controller is restarted.
The settings data that was saved in flash memory is enabled.
• Data That Is Saved
Scene data and system data are saved in the Controller. Logged images and data that are saved in the RAM disk
are not saved. Perform any of the following procedures to keep this data.
• Copying Data Saved in the RAM disk to External Memory
Reference: Saving Settings Data to the Controller RAM Disk or an External Memory Device (p.258)
• Changing the Save Destination for Logged Data to External Memory
Reference: Logging Measurement Values and Measurement Images (p.113)
• Using the Scene Group Function
The scene data that is set for scene group 0 is saved in the Controller for models FZ5-L3
and FZ5-6
. The
scene data from scene groups 1 to 31 is saved to the external memory and overwrites any previously saved data.
(For the FH or FZ5-11
, all data is saved in the Controller by default.)
• Immediately after starting up the FH/FZ5 Sensor Controller and immediately after changing scenes, there will be
no input image. No input image is processed as the same color image as in the factory default state.
• If you open the Properties Dialog Box before inputting an image, click the Cancel button to close the dialog box.
Pressing the OK button in the dialog box will change the setting to the same color camera setting as the factory
default setting.
(Reference: The measurement NG (image mismatch) error will result when connecting a monochrome camera
(p.832))
Note
IMPORTANT
Содержание fh-1 series
