manualshive.com logo in svg

Omron fh-1 series, Руководство пользователя, Страница: 171 / 882

Поделиться
Скачать
Omron fh-1 series Скачать руководство пользователя страница 171

WWW.NNC.IR

Saving Scene Groups in External Memory

169

4

Using Tools

Vision System FH/FZ5 Series
User’s Manual (Z340)

3

Set each item in the [External memory device settings] area.

4

Click [OK].

The scene group storage location is changed, and the current scene group data is transferred from the 
current storage location to the new storage location. An error message is displayed if the transfer fails.

Variable name

Set value [Factory default]

Content

External memory  
device settings

---

This setting is valid when [Save all scene group data in the 
external memory device] or [Save after the next scene 
group data in the external memory device] is selected for 
[Scene Group Saving Destination Setting].
Used to set the storage location folder.

• An error message is displayed if scene group data storage or reading fails. See ”Error Messages and Troubleshooting” in 

the Appendices for descriptions of error messages.
Reference:   Error Messages and Troubleshooting (p.827)

• When the scene group data storage location setting is changed, a file with the [*.scg] file extension is created at the new 

storage location. Do not change the file name or file extension of this scg file. If you change, the setting will not be saved 
or read correctly.

• You can check the available capacity of external memory in the setting screen. We recommend that you check whether 

your external memory has enough available capacity before changing the storage location.

• Clicking [Restore the defaults] restores the settings to their factory default values. There are different factory default 

settings for the FZ5-L35

@

/6

@@

 and the FH/FZ5-11

@@

.

• FZ5-L35

@

/6

@@

: Scene group 0 is stored in the Sensor Controller's flash memory; scene groups 1 and after are stored in 

external memory.

• FH/FZ5-11

@@

: Scene group 0, and scene groups 1 and after are stored in the Sensor Controller's flash memory.

IMPORTANT

Note

Содержание fh-1 series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов