![background image](http://html1.mh-extra.com/html/omron/fh-1-series/fh-1-series_user-manual_742686277.webp)
WWW.NNC.IR
Setting the Operation Mode
275
7
Ch
an
gin
g
th
e
Syst
em
E
nvir
o
nm
e
nt
Vision System FH/FZ5 Series
User’s Manual (Z340)
Functional Limitations of Multi-line Random-trigger Mode
Keep the following points in mind when using Multi-line Random-trigger Mode.
Item
FH Series
FZ5 Series
Processing time
• If the STEP signal is input at the exact
same time across lines 0 to 7, the
measurement on the other lines may be
delayed.
• If data logging occurs at the same time
for lines 0 to 7, the transaction time may
take longer than usual.
• If the STEP signal is input at the exact same
time for lines 0 and 1, the measurement on
the other lines may be delayed (roughly by
the same amount of the Camera Image Input
processing unit).
• If data logging occurs at the same time for
lines 0 and 1, the transaction time may take
longer than usual.
Number of Cameras
The maximum number of Cameras is 8 for
all lines.
The maximum number of Cameras is 2 for all
lines.
Error messages
Error messages are the same for lines 0 to
7. If an error occurs on any of the lines, an
error message is displayed and the
ERROR signal is turned ON.
Error messages are the same for lines 0 and 1.
If an error occurs on any of the lines, an error
message is displayed and the ERROR signal
is turned ON.
Saving data in the Controller
To save data in the Controller, the data must be saved separately for each line.
Save folder for captured
images
When you click [Capture] on the Measurement Manager Bar, captured images are always
saved to the folder that is specified for line 0.
Date-time setting, language
setting, and operation mode
setting
These settings can be set only for line 0.
These settings can be set only for line 0.
View
Images can be displayed simultaneously for
all lines. Use layout modification to set the
display position and size for the Main
Window for each line.
One of the lines must be selected to be
displayed. Both lines cannot be displayed at
the same time.
Communica-
tions
Parallel
• Parallel communications can be set only
for line 0. The settings for line 0 are
applied to lines 1 to 7.
• Refer to
Table 1
for details on the
differences between parallel I/O and
parallel terminals.
• Parallel communications can be set only for
line 0. The settings for line 0 are applied to
line 1.
• Refer to
Table 1
for details on the differences
between parallel I/O and parallel terminals.
Normal (RS-
232C/422)
RS-232C can be set only for line 0.
Lines 1 to 7 cannot be used.
RS-232C/422 can be set only for line 0.
Line 1 cannot be used.
Normal
(Ethernet)
• To use Ethernet, use a different port
number for each line.
• The IP address for the Controller cannot
be set for lines 1 to 7 (the IP address for
line 0 is used).
• To use Ethernet, use a different port number
for each line.
• The IP address for the Controller cannot be
set for line 1 (the IP address for line 0 is
used).
PLC Link (RS-
232C/422)
RS-232C can be set only for line 0.
Lines 1 to 7 cannot be used.
RS-232C/422 can be set only for line 0.
Line 1 cannot be used.
PLC Link
(Ethernet)
• To use Ethernet, use a different port
number for each line.
• The IP address for the Controller cannot
be set for lines 1 to 7 (the IP address for
line 0 is used).
• To use Ethernet, use a different port number
for each line.
• The IP address for the Controller cannot be
set for line 1 (the IP address for line 0 is
used).
EtherNet/IP
• To use EtherNet/IP, use an EDS file that
matches the line to be used.
• Specify different I/O memory addresses
for the sending area and receiving area
for line 0 and for lines 1 to 7.
• To use EtherNet/IP, use an EDS file that
matches the line to be used.
• Specify different I/O memory addresses for
the sending area and receiving area for line
0 and for line 1.
Содержание fh-1 series
