Omron CJ1W-CT021, Инструкции по эксплуатации, Страница: 144 / 196

4 Exchanging Data with CPU
4-20
CJ-series High-speed Counter Units Operation Manual for NJ-series CPU Unit(W492)
*_Ch1_OutSetPatCfg DWORD R/W Output Set Pattern Sets the output (0 to 31) set pattern.
Bits 0 to 31 correspond to output 00 to 31.
Each bit is set for 1 and no change for 0.
Data range: 16#00000000 to 16#FFFFFFFF
Factory value: 0
*_Ch1_OutRstPatCfg DWORD R/W Output Reset Pattern Sets the output (0 to 31) reset pattern.
Bits 0 to 31 correspond to output 00 to 31.
Each bit is reset for 1 and no change for 0.
Data range: 16#00000000 to 16#FFFFFFFF
Factory value: 0
*_Ch1_HystrsCfg UINT R/W Hysteresis Sets the hysteresis.
For 0, the hysteresis function is disabled.
*2
Data range: 0 to 255
Unit: Pulse
Factory value: 0
*_Ch1_NumRngCmpCfg WORD R/W Number of
Ranges/Comparison
Values (BCD) Sets the number of ranges/comparison values as a
BCD.
Data range: 16#0000 to 0032
Factory value: 16#0000
*_Ch1_MemAreaCfg UINT R/W
Memory Area
*3 This sets the area type for storing the range/com-
parison data.
0: EM (factory value)
1: DM
*_Ch1_MemAdrCfg DWORD R/W Memory Address
(BCD)*3
This sets the start address (EM/DM) for storing the
range/comparison data as a BCD.
Data range: 16#00000000 to 00032760
Factory value: 16#0000
Counter 2
*_Ch2_CtTypCfg UINT R/W Counter Type Sets the Counter type.
0: Circular Counter (factory value)
1: Linear Counter
*_Ch2_SigTypCfg UINT R/W Signal Type Sets the input type.
0: Phase differential (multiplication 1) (factory value)
1: Phase differential (multiplication 2)
2: Phase differential (multiplication 4)
4: Up & down pulse
8: Pulse & direction
Name of device variable
for CJ-series Unit
Type R/W Name Function