Omron CJ1W-CRM21, Руководство по эксплуатации

Страница: 139 / 172

Troubleshooting the Network Section 8-3
123
Figure 8.2: IO Controller status view
The LED indicators shown in the (example) figure above are all related to bit
flags in the Unit Status Word, the IO Controller Status Word 1 and Word 2, and
the IO Device Status Word.
Unit Status The table below lists combinations of LED indicators with information on
possible problems. They are derived from the Unit Status word. If one of the
errors occur then there is a problem with the IO Controller itself. Probably the
Unit needs to be replaced.
/i
LED Indicators Description/Correction
Unit Error The Unit Error flag is ON if the unit has an
error. That is if one of the other error flags
in the Unit Status is ON.
Controller Error The Controller Error Flag is On if one of
the IO Controller Status 2 error flags is
ON.
Error Log contains errors When a new error is logged in the Error
Log then this flag is ON. After reading or
clearing the Error Log this flag is OFF.
Reading or Clearing the Error Log can be
done or by the Diagnosis Error History of
the IO Controller DTM or by using the
appropriate FINS commands.
Configuration Transfer in progress During download of a new configuration
from the IO Controller DTM to the IO
controller this flag is ON