5
2. Adding/connecting a battery unit
2-1 Installation
The procedure for adding a battery unit is explained here.
Battery units can only be added for the BH100PCW UPS only.
Battery units cannot be added to the 600VA type BH60PCW UPS.
Up to 5 battery units can be connected to the BH100PCW UPS.
*When using the unit in compliance with UL standards, a total of up to 2 battery units can be connected.
Do not connect more than 2 units.
For information about units with no additional battery units connected, refer to the BH100PCW/BH60P-
CW instruction manual.
Correct positions
Horizontal
Vertical …
For vertical placement, make sure to position in this way.
BH100PCW
BHM100PC
BHM100PC
BHM100PC
Incorrect positions
Do not position the unit upside-down.
Do not position the unit so that
the right side is on the bottom.
Do not position the unit so that
the front panel faces downward.
Do not position the unit so that
the front panel faces upward.
