Omron BHM100PC, Инструкция по эксплуатации

Страница: 2 / 12

2
Do not exceed the ranges specified for environmental conditions during use/
storage.
Do not install or store the unit in the types of places listed below.

Do not store the unit in places where the humidity is lower than 10% or higher than 90%.

Do not use the unit in places where the humidity is lower than 25% or higher than 85%.

Do not install/store the unit in closed places such as cabinets with no clearance, places where there is
flammable or corrosive gas, or outdoors.

Installing or storing the unit in such places may cause a fire.
Do not block the air vents.
Do not use the product in a closed place and/or do not cover the product.

Doing so may cause abnormal heating or a fire.

Doing so will cause the internal temperature to rise, which may cause the unit to fail and the battery to dete-
riorate.

Leave at least 5 cm of space between the vent and the wall.
Do not install the unit in any position other than those specified.
Do not install the unit on an unstable base.
 Refer to ˝2-1 Installation˝ on page 4 for proper installation positions.
 Injury may result if the unit falls or is dropped.
Do not pinch or tie the cable of the unit.
 Doing so may damage the cable or cause it to become hot, resulting in an electric shock or a fire.
 If the cable is damaged, immediately stop using the unit and have it repaired.
All of the included accessories are designed to be used exclusively with the
unit. Do not use the accessories with other devices.

Doing so may compromise the safety of devices.
When installing the unit on a rack, use support angles (sold separately) and
mounting brackets to support and stabilize the unit.
When a battery unit is added, make sure to position the battery unit so that it is below
the main unit.
 When installing the unit on a rack, use support angles (sold separately) and mounting brackets. The front
mounting brackets are not able to support the weight of the unit without support angles.
 The weight of the unit is approximately:
BH60PCW(RE60FW): 6.3kg BH100PCW(RE100FW): 6.6kg
Battery unit BHM60PC: 8.2kg Battery unit BHM100PC: 10.3kg
When installing the unit on a rack, place it on the lowest shelf.

Injury may result if the unit falls.
Make sure to use the mounting screws included with the brackets (sold
separately).
 Mounting screws other than those included may not be strong enough to support the unit, causing it to fall.
Caution (installation)