Hardware reference
HARDWARE REFERENCE MANUAL
141
Revision 5.0
Step 3
Registers A001 and A002 are used by the Inverter to adjust the frequency
source and control source.
Step 4
Restart the Inverter for the changes to take effect.
Troubleshooting
The four LED indicators on the Option Board provide information on the
Option Board mode and status and the network status.
When an error occurs, the Option Board indicator pattern provides
troubleshooting information. For certain errors, additional information can be
obtained from the trip error code given by the four-digit display of the
Inverter.
In the following sections typical LED indicator and four-digit Inverter display
patterns are provided to assist in troubleshooting. To show the status of the
indicators, the following conventions are used:
Param Description
Setting
A001
Frequency Refer-
ence Selection 1
02 (Digital Operator, default)
05 (Option board 2)
A002
RUN Command
Selection 1
02 (Digital Operator, default)
05 (Option board 2)
Note
When restarting the Inverter, wait for the Inverter power indicator
to go out before switching on again.