11
AC Servomotors/Servo Drives 1S-series Instruction Manual
Note: 1. The above items reflect individual evaluation testing.
The results may differ under compound conditions.
2. Disconnect all connections to the Servo Drive before attempting a megger test (insulation re-
sistance measurement) on a Servo Drive. Not doing so may result in the Servo Drive failure.
Do not perform a dielectric strength test on the Servo Drive. Internal elements may be dam-
aged.
Servo Drive Rating
200-VAC Input Model: R88D-1SAN
H-ECT
General Specifications for Servo Drives
Item
Specifications
Operating ambient temperature and humidity 0 to 55°C, 90% max. (with no condensation)
Storage ambient temperature and humidity
-20 to 65°C, 90% max. (with no condensation)
Operating and storage atmosphere
No corrosive gases
Operating altitude
1,000 m max.
Vibration resistance
10 to 60 Hz and at an acceleration of 5.88 m/s
2
or less (Not to be run continuously at the reso-
nance frequency)
Insulation resistance
Between power supply terminals/power termi-
nals and PE terminals: 0.5 M
Ω
min. (at 500
VDC)
Dielectric strength
Between power supply terminals/power termi-
nals and PE terminals: 1,500 VAC for 1 min at
50/60 Hz
Protective structure
IP20 (Built into IP54 panel)
Inte
rnational Stand
ard
EU Direct
ives
EMC Directives
EN 61800-3 second environment, C3 category
(EN 61000-6-7: Functional Safety)
Low Voltage Directive
EN 61800-5-1
Machinery Directive
EN ISO 13849-1 PLe/Cat.3
EN 61508 SIL3
EN 62061 SIL CL3
EN 61800-5-2 SIL3 (STO/SS1/SS2/SOS/SLS/
SLP/SDI/SBC)
UL standards
UL61800-5-1
CSA standards
CSA C22.2 No.274
Item
Unit
Model (R88D-1SAN)
02H-ECT
04H-ECT
08H-ECT
Rated voltage
VAC
200 to 240 (170 to 252)
*1
Single-phase/3-phase
Power supply frequency
Hz
50/60 (47.5 to 63)
*1
Rated input
current
Single-phase
Arms
2.7 4.6 7.3
3-phase
Arms
1.5 2.7 4.0
Rated output
W
200
400
750
Rated output current (FLA)
Arms
1.5
2.5
4.6
Weight
kg
2.6
2.6
2.6