Omnitronic CP-120P, Руководство пользователя

Страница: 25 / 28

25
USB Devices and Memory Cards
Insert a USB device into the USB port and/or a memory card into the card slot (contacts pointing upwards).
The display indicates “
USB “ or “ SD “. After loading a data carrier, it is selected as the playback medium and
the playback will start automatically. Use the remote control to operate the music conveniently from a
distance.
Tuner Mode
Long actuation of the button [► ] starts the automatic station memory. The automatic station memory will
be running forward and stores stations with good receptions. Stored stations can be called with the buttons
PREV/[
] and NEXT/[ ]. For direct selection of a station use the numerical keys [0-9] on the remote
control.
Remote Control
When actuating a button, always direct the remote control towards the sensor. There must be no obstacles
between remote control and the sensor.
Button Function
PWR Audio player on/off
MUTE Mute
MODE Switches between USB/SD/Bluetooth/FM tuner
Repeat functions One/All
EQ Equalizer settings
PREV / NEXT Short actuation: previous/next title or radio station
Long actuation: fast rewind/forward
► Play/pause or auto station memory
/ Volume down/up
0-9 Direct title or station selection
Notes
• The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the
foil from the battery support on the rear side of the remote control. Otherwise operation of the remote
control is not possible.
• If the range of the remote control decreases, replace the battery. For this purpose,
on the rear side of the remote control press the small bar with the groove to the
right and at the same time remove the battery support. For operation, one 3 V
button cell type CR 2025 is required. When inserting, pay attention that the
positive pole of the button cell shows upwards in the support.
• Remove the battery from the remote control as a precaution if the device is not used for a longer period of
time.