Omnitron Systems OmniConverter FPoE+/S, Руководство пользователя

Страница: 9 / 10

Description
OmniConverter FPoE+/S
10/100BASE-T to 100BASE-X
Fiber Media Converter with PoE+
Standard Compliances
IEEE 802.3, 802.3af (15.40 watts)
IEEE 802.3, 802.3at (30 watts)
PoE Supported Modes
IEEE Alternate A (Alt A)
IEEE Alternate B (Alt B)
Cisco Legacy and High Cap
Environmental RoHS, WEEE and REACH
Frame Size Up to 10,240 bytes
Port Types
Copper: 10/100BASE-T (RJ-45)
Fiber: 100BASE-X (ST, SC, SFP)
100BASE-BX (SC, SFP)
Cable Types
Copper: EIA/TIA 568A/B,
Cat 5 UTP and higher
Fiber: Multimode: 50/125, 62.5/125µm
Single-mode: 9/125µm
AC Power Requirements
(Models with AC/DC Adapters)
1 RJ-45 Port:
100 - 240VAC/47 to 63Hz
0.34A @ 120VAC (typical)
2 RJ-45 Ports:
100 - 240VAC/50 - 60Hz
0.63A @ 120VAC (typical)
DC Power Requirements
(Models with DC Terminals)
1 RJ-45 Port:
+/-48 to +/-57VDC;
0.74A @ 48VDC
3 Pin Terminal (isolated) 2 RJ-45 Ports:
+/-48 to +/-57VDC;
1.37A @ 48VDC
3 Pin Terminal (isolated)
A minimum DC input voltage of 50VDC is required to guarantee 25.5
watts (for 802.3at) at the end of 100 meters on Cat 5 cable or better.
Dimensions (W x D x H) 4.5” x 6.0” x 1.0” (114.3 mm x 152.4 mm x 25.4 mm)
Weight
Module: 1.1 lbs. (498.9 grams)
Module with AC/DC Adapter: 2.3 lbs. (1043.3 grams)
Operating Temperature
(See Temperature Derating Table)
Commercial: 0 to 50°C
Wide: -40 to 60°C (-20°C AC cold start)
Extended: -40 to 75°C (-20°C AC cold start)
Storage: -40 to 80°C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4,000m
MTBF (hrs)
Module: 474,000
AC/DC Adapter: 100,000
Warranty Lifetime warranty with 24/7/365 free Technical Support
Regulatory Compliances
(*Pending)
Safety: UL 62368-1*,
UL 60950-1,
IEC 62368-1*,
IEC 60950-1,
EN 62368-1*,
EN 60950-1,
CAN/CSA C22.2 No. 62368-1-14*,
CAN/CSA C22.2 No. 60950-1,
CE Mark
EMC: EN 55032/EN 55024 CE Emissions/Immunity
EMI: CISPR 32,
FCC 47 Part 15 Subpart B Class A
EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV,
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m,
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models),
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models),
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models),
IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd;
Signal: 2 kV (AC models),
IEC 61000-4-6 CS: Signal: 3 V,
IEC 61000-4-8 ( Magnetic Field) 30A/m,
IEC 61000-4-11 (Voltage Dips, interrupts)
IP Rating: IP20 Protection
Page 17 Page 18