Omnitron Systems OmniConverter FPoE+/S, Руководство пользователя

Страница: 3 / 10

DIP-switch Bank Locations
The table below provides a description of each DIP-switch position and function.
Switch 1 Fiber, 1 RJ-45 1 Fiber, 2 RJ-45 2 Fiber, 1 RJ-45 2 Fiber, 2 RJ-45
1 Port 1 Duplex Mode Port 1 Duplex Mode Port 1 Duplex Mode Port 1 Duplex Mode
2 N/A N/A Port 2 Duplex Mode Port 2 Duplex Mode
3
Port 2 RJ-45
AUTO/MAN
Port 2 RJ-45
AUTO/MAN
Port 3 RJ-45
AUTO/MAN
Port 3 RJ-45
AUTO/MAN
4
Port 2 RJ-45 Speed
(Only in MAN mode)
Port 2 RJ-45 Speed
(Only in MAN mode)
Port 3 RJ-45 Speed
(Only in MAN mode)
Port 3 RJ-45 Speed
(Only in MAN mode)
5
Port 2 RJ-45 Duplex
(Only in MAN mode)
Port 2 RJ-45 Duplex
(Only in MAN mode)
Port 3 RJ-45 Duplex
(Only in MAN mode)
Port 3 RJ-45 Duplex
(Only in MAN mode)
6 Pause Capability Pause Capability Pause Capability Pause Capability
7 RJ-45 Port 2 PoE/PSE RJ-45 Port 2 PoE/PSE RJ-45 Port 3 PoE/PSE RJ-45 Port 3 PoE/PSE
8 N/A RJ-45 Port 3 PoE/PSE N/A RJ-45 Port 4 PoE/PSE
9 PSE Configuration Type PSE Configuration Type PSE Configuration Type PSE Configuration Type
10 PSE Configuration Type PSE Configuration Type PSE Configuration Type PSE Configuration Type
11 N/A N/A PSE Configuration Type PSE Configuration Type
12 Link Mode Selection Link Mode Selection Link Mode Selection Link Mode Selection
13 Link Mode Selection Link Mode Selection Link Mode Selection Link Mode Selection
14 PSE Reset PSE Reset PSE Reset PSE Reset
15 N/A N/A Redundant Fiber Link Redundant Fiber Link
16 N/A N/A Return to Port 1 Return to Port 1
DIP-switch Definitions
SW1 and SW2: F/O Duplex “FDX/HDX” DIP-switch
The module supports 100BASE-FX SFPs and fixed fiber transceivers. These
DIP-switches are used to configure the fiber duplex mode. Setting these
DIP-switches to the Up “HDX” position facilitates a connection that supports
Half-Duplex. Setting these DIP-switches to the Down “FDX” position facilitates a
connection that supports Full-Duplex operation.
Page 5
SW3, SW4 and SW5 RJ-45 Configuration DIP-Switches
SW3
RJ-45
AN/MAN
SW4
RJ-45
100/10
SW5
RJ-45
FDX/HDX
RJ-45 Mode of Operation
AN 100 FDX
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 100FDX, 100HDX, 10FDX, 10HDX
AN 100 HDX
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 100HDX, 10FDX, 10HDX
AN 10 FDX
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 10FDX, 10HDX
AN 10 HDX The RJ-45 port is set to auto-negotiation advertising 10HDX.
MAN 100 FDX The RJ-45 port is set to manual negotiation and is forced to 100FDX.
MAN 100 HDX The RJ-45 port is set to manual negotiation and is forced to 100HDX.
MAN 10 FDX The RJ-45 port is set to manual negotiation and is forced to 10FDX.
MAN 10 HDX The RJ-45 port is set to manual negotiation and is forced to 10HDX.
RJ-45 Port Configuration Matrix
SW6 - Pause “On/Off” DIP-Switch
In auto-negotiation mode, setting this DIP-switch to the Up “On” position allows the
unit to advertise Symmetrical and Asymmetrical Pause capability. In auto-negotiation
mode, setting the DIP-switch to the Down “Off” position allows the unit to advertise
no Pause capability. In the manual mode, this DIP-switch determines the Pause
behavior.
SW7 - Power Sourcing Function, RJ-45 Port
The module automatically detects the attached PD and provides the equipment
with the necessary power.
This DIP-switch controls the power sourcing function for Port 2 on the single-fiber
models and Port 3 on all other models (see DIP-switch Definition table on page
5). When this DIP-switch in the Down “On” position, the power sourcing function
is enabled. When the DIP-switch is in the Up “Off” position, the power sourcing
function is disabled.
Switch Position Description DOWN UP
7 RJ-45 Port 2 or 3 PoE/PSE Enabled (ON) Disabled (OFF)
8 RJ-45 Port 3 or 4 PoE/PSE Enabled (ON) Disabled (OFF)
Power Sourcing Function
SW8 - Power Sourcing Function, RJ-45 Port
This DIP-switch controls the power sourcing function for the 2nd RJ-45 port on
the 2 RJ-45 port models (see DIP-switch Definition table on page 5). When this
DIP-switch in the Down “On” position, the power sourcing function is enabled. When
the DIP-switch is in the “Off” UP position, the power sourcing function is disabled.
Page 6