OmniSwitch os6900, Руководство по настройке сети

Страница: 850 / 942

sFlow Diagnosing Switch Problems
page 32-32 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Displaying a sFlow Sampler
The show sflow sampler command is used to display the sampler table.
For example, to view the sFlow sampler table, enter the show sflow sampler command without specify-
ing any additional parameters. A screen similar to the following example is displayed, as shown below:
-> show sflow sampler
Instance Interface Receiver Sample-rate Sample-hdr-size
-----------------------------------------------------------------
1 2/ 1 1 2048 128
1 2/ 2 1 2048 128
1 2/ 3 1 2048 128
1 2/ 4 1 2048 128
1 2/ 5 1 2048 128
Note. For more information about the displays that result from these commands, see the OmniSwitch CLI
Reference Guide .
Displaying a sFlow Poller
The show sflow poller command is used to display the poller table.
For example, to view the sFlow poller table, enter the show sflow poller command without specifying any
additional parameters. A screen similar to the following example is displayed, as shown below:
-> show sflow poller
Instance Interface Receiver Interval
-------------------------------------------
1 2/ 6 1 30
1 2/ 7 1 30
1 2/ 8 1 30
1 2/ 9 1 30
1 2/10 1 30
Note. For more information about the displays that result from these commands, see the OmniSwitch CLI
Reference Guide .