OmniSwitch os6900, Руководство по настройке сети

Страница: 393 / 942

Configuring Multiple VRF Verifying the VRF Configuration
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 16-19
Verifying the VRF Configuration
To display a list of VRF instances configured for the switch, use the show vrf command. For example:
-> show vrf
Virtual Routers Profile Protocols
--------------------+-------+-------------------
default default BGP PIM VRRP
IpOne max RIP
IpTwo max BGP
IpThree low
The VRF CLI context determines which information is displayed using application-specific show
commands. For example, if IpOne is the active VRF context, then only IP interfaces associated with
IpOne are displayed.
-> vrf IpOne
IpOne: -> show ip interface
Total 1 interfaces
Name IP Address Subnet Mask Status Forward Device
--------------------+---------------+---------------+------+-------+--------
Loopback 127.0.0.1 255.0.0.0 UP NO Loopback
intfone 200.1.1.1 255.255.255.0 DOWN NO vlan 200
IpOne: -> vrf default
-> show ip interface
Total 6 interfaces
Name IP Address Subnet Mask Status Forward Device
--------------------+---------------+---------------+------+-------+--------
EMP 192.168.10.1 255.255.255.0 DOWN NO EMP
Loopback 127.0.0.1 255.0.0.0 UP NO Loopback
vlan 130 192.168.130.161 255.255.255.0 DOWN NO vlan 130
vlan 2 10.255.11.161 255.255.255.0 UP YES vlan 2
vlan-2000 172.20.0.1 255.255.0.0 UP YES vlan 2000
vlan-2100 172.21.0.1 255.255.0.0 UP YES vlan 2100
Note that when the default VRF CLI context is active, the show commands can display specific informa-
tion for another instance. This is done by first entering the vrf command followed by the instance name
and then the show command. For example, the following command displays the IP interfaces configured
for IpOne from within the context of the default VRF CLI:
-> vrf IpOne show ip interface
For more information about the displays that result from these commands, see the OmniSwitch CLI
Reference Guide .