OmniSwitch os6900, Руководство по настройке сети

Страница: 594 / 942

Configuring IPMSv6 on a Switch Configuring IP Multicast Switching
page 24-28 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Configuring an MLD Static Group
You can configure a port as an MLD static group by entering ipv6 multicast static-group , followed by
the IPv6 address of the MLD static group in hexadecimal notation separated by colons, a space, followed
by
vlan , a space, VLAN number (which must be between 0 and 4095), a space, followed by port , the slot
number of the port, a slash ( / ), and the port number.
For example, to configure an MLD static group with an IPv6 address of
ff05::5
enter:
-> ipv6 multicast static-group ff05::5 vlan 3 port 3/10
You can also configure a link aggregation group as an MLD static group by entering
ipv6 multicast static-group , followed by vlan , a space, VLAN number (which must be between 0 and
4095), a space, followed by port , a space, and the link aggregation group number.
For example, to configure link aggregation group 7 with designated VLAN 2 as a static group you would
enter:
-> ipv6 multicast static-group ff05::6 vlan 2 port 7
Removing an MLD Static Group
To reset the port so that it is no longer an MLD static group port, use the no form of the
ipv6 multicast static-group command by entering no ipv6 multicast static-group, followed by the IPv6
address of the static group in hexadecimal notation separated by colons, a space, followed by vlan , a
space, VLAN number, a space, followed by port , a space, the slot number of the port, a slash ( / ), and the
port number.
For example, to remove an MLD static member with an IPv6 address of
ff05::5
on port 10 in slot 3 with
designated VLAN 3 you would enter:
-> no ipv6 multicast static-group ff05::5 vlan 3 port 3/10