manualshive.com logo in svg

OmniSTAR 5220HP, Руководство пользователя

Поделиться
Скачать
OmniSTAR 5220HP Скачать руководство пользователя страница 22

OmniSTAR 5220HP User Manual 

Issue 1.32   12/2010 

 

22

 

Communication with the Receiver 

 
There are three different options to communicate with the receiver: 
 

- using the receiver’s menu system which is accessable through its 
  front  panel and LCD screen. 
- using a terminal program on a Microsoft Windows-based computer  

 

- using Viewall on a PDA.  

Serial ports 

 
The 5220HP features two serial ports. The ports handle communication to and 
from the GPS Receiver.  
The ports may be configured for a mixture of NMEA 0183, binary data and 
RTCM SC-104 data. 

USB Ports 

 
The USB configuration of the 5220HP receiver comprises two USB-A male 
connectors. Each port has its function marked on the end plate of the receiver. 
The port marked “Data Com” is wired as USB-B port for data communication 
with the receiver. There is a USB-A to USB-A cable included with your receiver 
to use with this port. Connect one end of the supplied cable to the receiver and 
the other end to a host computer. The computer should immediately identify 
the receiver as a generic serial port and load the appropriate driver.

 

If no appropriate device driver is found, see Appendix D 

 

This USB DATA port automatically switches the PORT-A receive line from the 
DB9 connector to the USB connector when the USB cable is connected and 
the Microsoft Serial BallPoint has been disabled. You may still receive data on 
both USB and PORT-A at the same time and the same baud rate, but only talk 
to the receiver on the USB port when it is connected. When the USB cable is 
unplugged, PORT-A will return to normal use. 
 
The second port marked “MEM STICK” is used for data logging onto a USB 
memory stick. If there is a status LED on your memory stick, it should become 
active after the receiver has identified the USB memory stick inserted into the 
connector. For further data logging options on the memory stick, please see 
the following section on the data logging menu.  
 
If you mistakenly connect the supplied USB-A to USB-A cable into the “MEM 
STICK” connector or a USB memory stick into the “DATA COM” port, the USB 
functionality will not work. The ports are not interchangeable. Only when the 
appropriate device is connected to the appropriate connector will the USB 
functionality work. 

Содержание 5220HP




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды