P15
READ!!! SLIM TV
(6 cm thickness or less only)
Remove perforated tabs to Access Tension Springs
(11)
on Front Monitor Plate.
Remove
the first screw to the right side of the Monitor Plate.
Insert screwdriver or solid rod into slot holes on Right, applying pressure (IMPORTANT!).
Assistance Highly Recommended:
While applying pressure carefully unscrew second
screw.
Once second screw is removed,
slowly allow the tension spring to unwind upwards
. Allow it
uncoil until it rests. If in future a larger Monitor / TV are to be installed on Auto Wall Mount,
Please Reverse Steps Above to adjust Tension to Springs.
READ!!!!! Mount comes adjusted factory default suitable to fit most TV’s.
This step is ONLY Slim Size Televisions with a depth of 0.24 in. (6 cm) or
less.
Check you TV installation Manual if your TV fits this criteria. You must
adjust TV’s in this size range in order for the mount to function properly.
If your
TV does not fit this criteria, Skip to Page 16.
10
11
11
SPRING TENSION IS HIGH. DO NOT LOOSE GRIP ON SCREWDRIVER / ROD!
