OmniGuide BEACON 420030-AA Скачать руководство пользователя страница 29

Страница: 29 / 55

L-1670 Rev 0

10. UNPACKING AND INSPECTION

Before unpacking the Laser inspect the shipping container carefully for evidence of

rough handling and note any damage. Immediately inform the shipping carrier and

OMNIGUIDE or the distributor of any evidence of damage in shipment.

If there is any discrepancy noted, inform your distributor or OMNIGUIDE directly.

PLEASE NOTE THAT THE ACCESSORIES fOR ARTICULATING ARM

WILL ARRIVE IN A SEPARATE SHIPPING CONTAINER.

List of Items in the Box

•

The BEACON Advanced Energy Laser System

•

Power cord

•

foot pedal

•

The BEACON Advanced Energy Laser System Instructions for Use.

•

Gas hose

•

Laser safety signage

•

Laser goggles

If any items are missing, immediately report this to OmniGuide or the representative

in your country. Report exactly the items missing and verify whether the Laser can be

installed or the items missing will not allow you to install and operate the Laser.

If you need to ship the Laser back to OmniGuide, you MUST ship it in the OmniGuide shipping

container and packing material. If the Laser is not packed properly and damage occurs during

shipment, the customer will incur all charges for the repair of damaged or missing parts.

Safety Issues in Laser Setup

Setup of The BEACON Advanced Energy Laser System must comply with all applicable electrical

safety and Laser safety laws and regulations in the country the Laser is installed.

Review all the regulations which exist in your country.

Some information regarding safety based on international laws like in

the EC (EN) or US (FDA) regulations is listed below.

Do not connect the Laser power cable to wall outlets without a proper ground.

Do not connect other instruments to the same wall outlet where the Laser is connected.

Check the fuse for the wall outlet with the rating given in this manual

(The fuse installed is rated for a specific voltage used).

Do not use power cables other than those supplied with the instrument. If the connection

to the main power socket is different than the cable supplied, contact your local electric

supply office for guidelines on the power cable to be used with medical equipment.

Do not setup the unit close to any flammable material.

Содержание BEACON 420030-AA
























































Результаты поиска

Содержание BEACON 420030-AA

Отзывы:

Бренды по названию

Популярные бренды

OmniGuide BEACON 420030-AA, Инструкция по эксплуатации

Результаты поиска

Содержание BEACON 420030-AA

Отзывы:

Бренды по названию

Популярные бренды