Omnia MN-RCV3, Справочное и монтажное руководство

Страница: 6 / 28

4 Reference & Installation Manual
• Full system supervision (check-in, low battery and tamper)
• Transmitter signal strength indicator
• Transmitter battery life display
2.0 INSTALLATION
The following sections will detail how to mount and connect the Omnia Wireless
Receiver Module (OMN-RCV3).
2.1 LOCATION
Mount the Wireless Receiver Module on a wall allowing at least 5cm (2in) around
the module to permit adequate ventilation and heat dissipation. Select a site that is
not susceptible to drastic temperature changes. Avoid installation near or in the path
of strong RF fields (i.e. neon lights, computers), on or near metal objects, circuit
breaker boxes, air conditioners, and heater ducts since they may cause interference
and reduce the module’s sensitivity. We recommend installing the module in a
centralized location on the main floor. Avoid installing the module in the basement.
Refer to the Digiplex or DigiplexNE Reference & Installation Manual for maximum
allowable distances between the control panel and the Wireless Receiver Module.
2.2 CONNECTIONS AND MOUNTING
Firmly screw the antenna into the connector marked ANT on the Receiver Module
(refer to Figure 2.1 on page 5). Using a drill or screwdriver, punch out the four
mounting holes on the back of the plastic case. Align the six holes of the printed
circuit board with the six pins on the back plastic mounting case and snap into place.
If placed correctly, the antenna will lean directly over the groove in the mounting
case.
Do not cut, bend, or alter the antennas. Avoid mounting the Receiver
Module near or on metal as this may affect its sensitivity.
The Receiver Module is connected to the control panel's communication network in
a star or daisy chain configuration. The communication network provides power and
two-way communication between the control panel and all the modules connected to
it. Refer to Figure 2.1 on page 5 for instructions on connecting the Wireless Receiver
Module to the control panel.