Omnia MN-RCV3, Справочное и монтажное руководство

Страница: 15 / 28

Omnia 13
4.0 SUPERVISION OPTIONS
The Omnia Wireless Receiver Module offers a variety of supervision options that
allows the module to monitor the status of the module, detectors, and door contacts.
4.1 LOW BATTERY SUPERVISION
SECTION
[001] :
OPTION
[1]
Option [1] enables the Low Battery Supervision feature. When a detector or door
contact’s battery voltage drops below a recommended level (refer to the
transmitter’s Instructions), its red LED will flash and it will transmit a signal to the
Wireless Receiver Module indicating that the voltage is low. If this option is enabled,
the Receiver Module will transmit the signal to the control panel which will generate
a trouble and can transmit a report code to the monitoring station (refer to the
Digiplex or DigiplexNE Reference & Installation Manual).
4.2 CHECK-IN SUPERVISION
SECTION
[001] :
OPTION
[2]
Option [2] enables the Check-in Supervision feature. The Wireless Receiver Module
waits for each of its assigned detectors and/or door contacts to send a status signal
within a specified time period (as programmed in section 4.3 on page 14) to confirm
their presence and functionality. If a device has not sent a signal within that time
period, the Wireless Receiver Module will transmit a supervision loss signal to the
control panel. The control panel can then generate a trouble, an alarm and/or can
transmit a report code to the monitoring station. For details refer to the Digiplex or
DigiplexNE Reference & Installation Manual.
How to enable low battery supervision.
In step 5 in Figure 3.3 on page 7:
1. Enter section [001].
2. Enable or disable option [1].
Option [1] OFF = Low Battery Supervision disabled (default)
Option [1] ON = Low Battery Supervision enabled